Use our logo with your story
Please be sure to review the Encore Health Network Identity Standards before you do
Sizes and Position
The width of the logo should be 1 1/2 inches. This is the preferred size for use on marketing materials. The logo should always be scaled in proportion.
The width of the logo should be no less than 1/2 inch. This application is only for insurance cards. The PPO and Health Network portion of the wordmark are not to be used, and the logo should be used as a single color. The logo should be scaled in proportion.
The minimum amount of clear space around all sides of the logo is 1/4 inch, indicated by the black line. This space is designed for use on literature to protect the logo from page elements appearing too close. When possible, the clearance space should be even greater. This minimum area also applies to the trim of any item in which the logo is used.
(a) Encore E-Ball
* Pantone 356
* (C 100, M 0, Y 100, K 24)
* HEX #006027
* (R 0, G 36, B 13)
* (C 0, M 0, Y 0, K 100)
* HEX #000000
* (R 0, G 0, B 0)
* (C 0, M 0, Y 0, K 50)
* HEX #999999
* (R 127, G 127, B 127)
(d) Health Network
* (C 0, M 0, Y 0, K 75)
* HEX #666666
* (R 64, G 64, B 64)
Encore green (PMS 356) and black (k) can be used as a tint. Increments of 5% are to be used.
To maintain the integrity of our logo, use only the approved electronic artwork available for download above. This artwork should never be adjusted or altered.
Encore uses two colors for its core brand items: Encore green and black. When printing one color or two colors as output, use Encore green (Pantone 356) and black (100% k).
When printing four-color process, a CMYK version of the Encore green (C 100, M 0, Y 100, K 24) and the black (C 0, M 0, Y 0, K 100) of the logo can be used.
The preferred one-color version of the Encore logo is the black version (100% k). An Encore green version (PMS 356) of the logo is also available.
A reversed-out version of the logo is available for use on solid colors, provided there is enough contrast to allow the logo to be prominent. The Encore E-Ball can be used as a single element or graphic, separate from the company name. However, it does not replace the logo, but should be used to further enhance the Encore logo and brand.